KraftMaid
Shaker
Modern flat-panel
Two-tone cabinets
Cambria quartz
Butcher block
Open shelvingFree design consultation - KraftMaid and Wellborn cabinet lines, Cambria and Silestone surfaces, and every tier from refacing to full custom laid out side by side
Why Enterprise Homeowners Choose KraftMaid Kitchen Remodeling
We provide independent KraftMaid kitchen remodeling service in Enterprise, connecting homeowners with local professionals who install, reface and repair KraftMaid cabinetry every week. What sets our KraftMaid work apart is the field detail: semi-custom boxes live or die on measurements, filler widths and reveal alignment, and the pros we work with handle those tolerances as routine. We are an independent service provider. We are not affiliated with, authorized by or endorsed by KraftMaid, and we don’t imply otherwise.
Enterprise is a master-planned, HOA-governed suburb carved out of unincorporated Clark County south of the Las Vegas Strip, so a KraftMaid project here usually starts with two approvals before demo day: a Clark County Department of Building & Fire permit and the architectural review committee for your subdivision. Owners routinely underestimate that pair, and it’s a common reason a kitchen stalls mid-plan. Most Enterprise homes are recent enough that people remodel to upgrade builder-grade finishes rather than fix failing systems, which makes KraftMaid a natural fit for the upgrade path.
Call (833) 522-7502 to schedule your free estimate. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday.
Why Trust Kitchen Remodeling Enterprise for Your KraftMaid Kitchen Remodeling?
KraftMaid builds semi-custom cabinetry on a fixed door and finish menu. That model rewards installers who know the menu, not generalists learning it on your dime. Our technicians have up to 10 years of experience, and the professionals we connect you with work on KraftMaid cabinets daily: they know the Vantage entry-level semi-custom line, the Momentum frameless full-access line, the Portrait full-overlay framed line and the Prelude framed doors, and they know how each one behaves once it’s on a real wall in a real Enterprise kitchen.
Brand fluency changes the conversation. An estimator who works with these boxes can tell you before anything is ordered whether a run needs a wider filler, whether a full-overlay door will rub against a return wall, and whether your existing glides can be re-adjusted or should be swapped. We install to the manufacturer’s standard so the warranty stays intact, and we use quality parts that fit KraftMaid equipment rather than parts that almost fit.
Your kitchen is too permanent to guess on materials. That’s the standard we hold on every Enterprise job: correct measurements, correct boxes, correct fillers, counters templated to the cabinets that actually got installed. One team from cabinet frames to countertop edges. Nothing gets handed off to a different trade mid-project.
Styles & brands we work with
- Shaker
- Modern flat-panel
- Two-tone cabinets
- KraftMaid
- Cambria quartz
- Butcher block
- Open shelving
Common KraftMaid Kitchen Remodeling Problems We Fix in Enterprise
KraftMaid cabinets are well-built, but every cabinet system has failure modes. These are the ones we see most in Enterprise kitchens, and what causes each.
- Peeling and checking on painted and glazed finishes. Glazing and chalk or cream rub-through finishes tend to lift along door edges and drawer fronts nearest the range and the dishwasher. Steam cycling plus heat is the cause, not a bad finish batch. Once it starts at an edge, it spreads along the joint line.
- Sagging drawer bottoms and racked drawer fronts. Particleboard-core and MDF slab drawers with stapled or doweled box joints loosen over time. The bottom sags, the front drops out of square, and the drawer starts catching on the frame. Heavy cookware and a full drawer of utensils speed this up.
- Doors that drift and drawers that slam. Soft-close hinges and Blum-style undermount glides lose adjustment or damping within a few years of daily use. Doors stop sitting flush, drawers close hard, and the fix is usually adjustment first, replacement second.
- Out-of-square frames and visible reveal drift. Framed cabinets set into an older or imperfect wall go out of square. On full-overlay doors you’ll see uneven reveals, rubbing gaps where a door meets a return, and mismatched fillers between KraftMaid boxes. It’s a measurement and shimming problem, not a cabinet defect.
- Finish fatigue in desert light and dry air. Large west- and south-facing kitchen windows in Enterprise get intense Mojave sun, and 100°F+ summers with single-digit humidity pull moisture out of wood components. Rapid temperature swings and monsoon-season humidity spikes then stress cabinet joints and push laminate and solid-surface counters to expand and contract. UV-stable finishes and heat control at the glass both matter here.
KraftMaid Parts & Our Repair-vs-Replace Approach
The decision is simpler than it looks. If the KraftMaid boxes and rails are solid, keep them and address what failed. If a finish or a box has failed across an entire run, replacing that run is usually the better value than spot repairs that never quite match.
When we keep the boxes, we spec OEM door and drawer fronts, fillers and hinges for an exact finish and drilling match. That’s the only way to get a glazed or painted front to line up with the cabinets around it. Aftermarket glides and hinges are acceptable only where the OEM profile is matched precisely; otherwise the fit and the damping come out wrong, and you’ll feel it every time you close a drawer. We don’t claim to stock genuine KraftMaid parts. We source what fits and install it to the manufacturer’s standard.
A common KraftMaid scenario: a kitchen of framed, glazed cabinets where the finish has begun to lift along the door edges nearest the range and the undermount drawers no longer sit flush. The usual cause is steam and heat cycling at the finish plus worn glides in particleboard-core boxes. A qualified local pro will assess whether the boxes and rails are solid, then reface or replace doors and upgrade glides, or replace the failed run and match new KraftMaid fronts to the surviving cabinetry. Call (833) 522-7502 for a free estimate and a straight answer on which path fits your kitchen.
Our KraftMaid Service Process – Step by Step
- 1
Measure and diagnose. We check box condition, rail integrity, reveal alignment and glide wear, and confirm what the finish is doing at the steam zones. In Enterprise we also confirm HOA architectural review status so approval doesn’t stall the work later.
- 2
Decide reface, repair or replace. Sound boxes with worn fronts and glides point to refacing. A failed run points to replacement. We put the recommendation in writing, with the KraftMaid line and door style named, so you know exactly what’s being ordered.
- 3
Install to the manufacturer’s standard. Boxes set level and shimmed square against slab-on-grade walls, fillers cut to the measured gap, doors hung so reveals stay consistent across the run.
- 4
Template and set countertops. Quartz templated against the cabinets that actually went in, not the plan drawing. Cambria, Silestone and Caesarstone are all available.
- 5
Check operation and warranty alignment. Every door, drawer and glide tested under load. We walk the finished kitchen with you and confirm the installation meets the conditions KraftMaid’s warranty expects.
See the difference
Before
After
Before
After
Before
AfterKraftMaid Products We Service & Install in Enterprise
We cover the KraftMaid cabinetry work a kitchen actually needs: new cabinet installation across the Vantage, Momentum, Portrait and Prelude lines, cabinet refacing where the original boxes are sound, full cabinet replacement for failed runs, island installation and the quartz countertops and backsplash that finish the room. We also handle repair work on existing KraftMaid kitchens: door and drawer front replacement, hinge and glide upgrades, filler corrections and reveal realignment. If you’re weighing refacing against a full changed layout, we’ll tell you which one your boxes support. Our technicians have up to 10 years of experience with this kind of work.
We Also Service These Brands
KraftMaid is one brand in a short list we know well, and we’re not tied to any single manufacturer. Countertop work spans Cambria, Silestone and Caesarstone, so you choose the surface that fits your kitchen and your life rather than accepting a one-brand offer. We also install Wellborn cabinetry and coordinate Kohler, Moen and Blanco fixtures and sinks, so cabinets, counters and hardware come together as one kitchen.
FAQs – KraftMaid Kitchen Remodeling Service in Enterprise
No. We are an independent service provider. We are not affiliated with, authorized by or endorsed by KraftMaid, and nothing on this page should be read as a manufacturer relationship. What we do offer is deep familiarity with KraftMaid cabinetry through regular installation and repair work. Call (833) 522-7502 for a free estimate.
Yes. We spec OEM door and drawer fronts, fillers and hinges for an exact finish and drilling match, and we use matched-profile aftermarket glides or hinges only where the OEM profile lines up precisely. We don’t claim to stock genuine KraftMaid parts. We source what fits and install it to the manufacturer’s standard. Call (833) 522-7502 to talk through your cabinet.
Most KraftMaid repair and refacing work runs a handful of days on site, while a full cabinet replacement or complete kitchen remodel is measured in weeks. The real variable in Enterprise is approval timing: the Clark County permit and your HOA architectural review both sit ahead of demo, and the written estimate lays out the sequence so you can plan around it. Call (833) 522-7502 for a free estimate.
We cover KraftMaid cabinetry across the Vantage, Momentum, Portrait and Prelude lines: new installation, refacing, full replacement, island installation, and repair of existing doors, drawer fronts, hinges, glides and fillers. Quartz countertops and backsplash go on top of that same work. Call (833) 522-7502 to confirm your specific setup.
Not if the work is done to the manufacturer’s standard. Warranty problems usually come from installation that ignores the spec: unlevel boxes, wrong filler widths, or hinges that don’t match the drilling pattern. We install to spec and keep the alignment intact, and we’ll tell you plainly if a repair you’re considering would put coverage at risk. Call (833) 522-7502 for a free estimate.
Typical estimated ranges in Enterprise are $14,000 – $45,000 for a full kitchen remodel and $9,000 – $20,000 for a small one, with cabinet installation at $4,000 – $13,000 and countertop installation at $2,000 – $6,500. These are estimates, not quotes; the written estimate sets the final price. Call (833) 522-7502 for an exact quote, estimates are free.
| Service | Typical Estimated Range |
|---|---|
| Kitchen Remodel | $14,000 – $45,000 |
| Small Kitchen Remodel | $9,000 – $20,000 |
| Cabinet Installation | $4,000 – $13,000 |
| Countertop Installation | $2,000 – $6,500 |
| Backsplash Installation | $800 – $2,500 |
| Kitchen Island Installation | $3,000 – $10,000 |
Yes, if your existing boxes and rails are solid. We measure the current run, match the door style and finish on the KraftMaid menu, and replace fronts and fillers without touching the carcass. It’s the least disruptive path for an Enterprise kitchen that just has tired or peeling fronts. Call (833) 522-7502 for a free estimate.
Steam and heat cycling. Glazed and painted finishes take repeated moisture from cooking and the dishwasher, and they lift first at door and drawer edges closest to those appliances. It’s a localized failure, not a bad finish, which is why the fix is usually replacing the affected fronts and adding ventilation rather than refinishing the whole kitchen. Call (833) 522-7502 to have it looked at.
Reface if the boxes, rails and joints are sound and the layout works. Replace the run if the finish or the box has failed across it, because spot repairs won’t match the surviving cabinets. An on-site assessment settles it. Call (833) 522-7502 for a free estimate.
Yes, when the base boxes are level, solid and properly secured. Quartz is templated on site against the cabinets that are actually there, so any out-of-square frame or shifted filler gets corrected before the slab is cut. Cambria, Silestone and Caesarstone are all options. Call (833) 522-7502 for a free estimate.
Yes, if the opening is measured before the new box is ordered. Standard appliance openings depend on the exact cabinet width and filler plan, and a replacement run that’s sized loosely will leave a dishwasher jammed or an unsightly gap at the range. We measure the appliances first, then specify the boxes. Call (833) 522-7502 for a free estimate.
Book Your KraftMaid Service in Enterprise, NV
Whether your KraftMaid kitchen needs new door fronts, a reworked run or a full remodel with quartz counters, the next step is a written estimate. We’ll look at the boxes, the finish and the layout, then tell you what’s worth keeping. Call (833) 522-7502 to schedule your free estimate. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday.
Written by the team at Kitchen Remodeling Enterprise.